TPR010 - RED BILLET VALVE COVER - RZR
Was:
$675.00
Sale:
$634.50
Save:
6%
Save:
$40.50
Description
This is the gen 2 TPR valve cover with a variety of features. These valve covers are made in house in the USA and CNC engraved for maximum quality.
GEN 2 BILLET VALVE COVER -
With the gen 2 valve cover you will have the choice to run your stock plug wires, ProXP coils, MSD coils, TPR Full Flow water kit and can choose to have cam oilers or not. Cam oilers are recommended if you're running fast action aftermarket camshafts.
FULL FLOW WATER KIT OPTION -
Using this valve cover will also allow you run our full flow water kit design that eliminates the death air pocket that can form in the upper portion of the cylinder head water jacket causing 80% of all head gasket failures and plumbs right into your radiator return line hose. After installing this water kit you'll be able to bleed your coolant from back right of the car in a Head-Ache free area. In pictures above you can see where the water spud from this kit comes through the valve cover. This kit is also available for sale on our website (Part Number - TPR010W)
VALVE COVER KIT INCLUDES -
Polaris replacement bolt grommets
(1) 6mm ARP bolt
Tube of 263 Red Loctite
Valve cover of choice
MSD Coils w/ ARP bolts & wire harness (If selected)
Cam oiler kit (If selected)
FITS POLARIS RZR MODELS -
XP1000
XPTurbo
XPTurbo-S
RS1
HEAT SHIELD MODIFICATIONS -
If you buy a kit with MSD coils or a full flow water kit and carry a lot of weight in your bed you might need to do some heat shield modifications. The factory beds are very flexible and extra weight may cause heat shield to contact the MSD coils and possibly ruin them. Modifications can be made with the following holesaw sizes and measurements in the picture below.
IGNITION CODE -
MSD coil kits may experience a cold start ignition code, this is due to a variance in ignition dwell timing maps in aftermarket tuners. We have seen about 10% of our customers reporting a cold start code with an aftermarket tune. We are currently working on new ignition dwell map that can be loaded into your tune to resolve this issue. If you experience this issue it will go away after your car has run for a few minutes on cold start.
IF YOU WANT A CUSTOM COLOR OR LOGO PLEASE CALL (541) 326-4943 or email utvobsessions@gmail.com
Custom colors and logos have a 2 week lead time minimum.
GEN 2 BILLET VALVE COVER -
With the gen 2 valve cover you will have the choice to run your stock plug wires, ProXP coils, MSD coils, TPR Full Flow water kit and can choose to have cam oilers or not. Cam oilers are recommended if you're running fast action aftermarket camshafts.
FULL FLOW WATER KIT OPTION -
Using this valve cover will also allow you run our full flow water kit design that eliminates the death air pocket that can form in the upper portion of the cylinder head water jacket causing 80% of all head gasket failures and plumbs right into your radiator return line hose. After installing this water kit you'll be able to bleed your coolant from back right of the car in a Head-Ache free area. In pictures above you can see where the water spud from this kit comes through the valve cover. This kit is also available for sale on our website (Part Number - TPR010W)
VALVE COVER KIT INCLUDES -
Polaris replacement bolt grommets
(1) 6mm ARP bolt
Tube of 263 Red Loctite
Valve cover of choice
MSD Coils w/ ARP bolts & wire harness (If selected)
Cam oiler kit (If selected)
FITS POLARIS RZR MODELS -
XP1000
XPTurbo
XPTurbo-S
RS1
HEAT SHIELD MODIFICATIONS -
If you buy a kit with MSD coils or a full flow water kit and carry a lot of weight in your bed you might need to do some heat shield modifications. The factory beds are very flexible and extra weight may cause heat shield to contact the MSD coils and possibly ruin them. Modifications can be made with the following holesaw sizes and measurements in the picture below.
IGNITION CODE -
MSD coil kits may experience a cold start ignition code, this is due to a variance in ignition dwell timing maps in aftermarket tuners. We have seen about 10% of our customers reporting a cold start code with an aftermarket tune. We are currently working on new ignition dwell map that can be loaded into your tune to resolve this issue. If you experience this issue it will go away after your car has run for a few minutes on cold start.
IF YOU WANT A CUSTOM COLOR OR LOGO PLEASE CALL (541) 326-4943 or email utvobsessions@gmail.com
Custom colors and logos have a 2 week lead time minimum.
Details
- 30503028
- TPR Industry
- New
Shipping Information
- Item Requires Shipping
- Free Shipping!
Customer Reviews
Total Reviews (0)
You must login to post a review.
Write the First Review!